All materials

Glaze material · Colorants

Cobalt oxide

Also sold as: black cobalt oxide

Concentrated cobalt blue — a little goes a long way.

colorantContributes: CoO

In published recipes

Used in 604 of 10,859 glaze recipes (5.6%)

Typical amount when present

1% of the dry batch — half of recipes fall between 0.8% and 2%.

Fired surface of those recipes

Glossy 49% · Matte 22% · Semi-glossy 16% · Satin 14%

Cones where it appears

Share of recipes containing this material that fire to each cone.

Most often mixed with

Materials that appear in the same recipes most often.

Chemistry

Raw formula
Co3O4
Molecular weight
241
Fired formula
CoO
Equivalent weight
80

From Linda Arbuckle's materials table. Mineral formulas are idealized; buy an analysis for the bag you have. Equivalent weight is the weight that supplies one molecule of the fired oxide — the number glaze calculation uses.

What potters should know

Stronger than the carbonate but tends to speckle unless well dispersed. Same colour chemistry: ultramarine with alkalis, purple with magnesium.

Handling and safety

Contains cobalt compounds. Respiratory sensitizer; skin contact can cause dermatitis. Use respirator and gloves during mixing.

Dry ceramic materials generate respirable silica dust. Use a NIOSH-approved N95 or P100 respirator and adequate ventilation when mixing dry, and wet-clean surfaces.

This information is provided for planning purposes and is derived from publicly available sources including OSHA regulations, NIOSH guidance, and manufacturer safety data sheets. It does not constitute professional safety advice. Consult your material suppliers' SDS documents and applicable local regulations for authoritative safety guidance.

Questions

How much Cobalt oxide do potters use in a glaze?
Across 604 published glaze recipes containing it, the typical amount is 1% of the dry batch, with half of recipes between 0.8% and 2%. Colorants and additives sit far lower than fluxes and glass formers; treat these as a range to test around, not a target.
What cone is Cobalt oxide used at?
It appears in recipes across the range; the most common cones among published recipes are cone 6, cone 7, cone 10. Where a material sits depends on the rest of the recipe more than on the material itself.
Is Cobalt oxide safe to use?
It carries a specific hazard flag: Contains cobalt compounds. Respiratory sensitizer; skin contact can cause dermatitis. Use respirator and gloves during mixing. Read the supplier's SDS and follow local rules before using it, and never assume a glaze is food-safe without testing.

Related materials

Glaze materialrecipestypical
Cobalt carbonate1,1811%

Sources. Usage figures are computed by Claybench over 10,859 glaze recipes compiled from publicly shared community recipe collections (snapshot 2026-02-27) — counts only; no recipe is reproduced, and the figures describe that collection, not every recipe in existence. Material roles and notes are paraphrased from Linda Arbuckle's Ceramic Materials handout unless noted. Hazard notes summarise supplier SDS guidance; read the SDS for the product you buy.

Claybench tracks your glaze materials, not just recipes

Inventory, hazard flags, and per-piece material cost — the same reference behind this page, wired into your studio.

Start free